Lenovo C325 Lenovo C225\C320\C325 Hardware Replacement Guide V1.0 - Page 15

Replacing a memory module, Unplug all power cords from electrical outlets. - touch screen

Get Lenovo C325 PDF manuals and user guides View all Lenovo C325 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Replacing a memory module Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover. Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches or other damage. 1. Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating system, and turn off the computer and all attached devices. 2. Unplug all power cords from electrical outlets. 3. Disconnect all cables attached to the computer. This includes power cords, input/output (I/O) cables, and any other cables that are connected to the computer. Refer to "Left and right views" and "Rear view" for help with locating the various connectors. 4. Remove the memory cover as shown. 1 2 10 Hardware Replacement Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
10
Hardware Replacement Guide
Replacing a memory module
Attention:
Turn off the computer and wait 3 to 5 minutes to let it cool down before
removing the cover.
Note:
It may be helpful to place the computer face-down on a soft flat surface
for this procedure. Lenovo recommends that you use a blanket, towel, or
other soft cloth to protect the touch screen from scratches or other damage.
1.
Remove any media (disks, CDs, or memory cards) from the drives, shut down
the operating system, and turn off the computer and all attached devices.
2.
Unplug all power cords from electrical outlets.
3.
Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Left and right views” and “Rear view” for help with locating
the various connectors.
4.
Remove the memory cover as shown.
1
2