Lenovo E4325 User Guide - Lenovo E4325 - Page 47

Insert the new PCI Express Mini Card into the slot at an angle about 20 degrees until it snaps into

Get Lenovo E4325 PDF manuals and user guides View all Lenovo E4325 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

4. Remove the screws 1 , and then remove the bottom slot cover 2 . 1 1 2 2 5. If a tool for removing connectors is included in the package with the new card, use the tool to disconnect the cables from the card that is currently installed 3 . If no such a tool is included, disconnect the cables by picking up the connectors with your fingers and gently unplugging them. Then remove the screw 4 and the card pops up. 4 3 3 6. Remove the card. 5 7. Insert the new PCI Express Mini Card into the slot at an angle about 20 degrees until it snaps into place. Carefully pivot the card downward until it snaps into place. Then, install the screw to secure the new card. 8. Connect the antenna cables to the new PCI Express Mini Card. Ensure that you connect the gray cable to the connector on the card marked with "MAIN" or "M", and connect the black cable to the connector marked with "AUX" or "A". Chapter 6. Replacing devices 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
4. Remove the screws
1
, and then remove the bottom slot cover
2
.
2
2
1
1
5. If a tool for removing connectors is included in the package with the new card, use the tool to disconnect
the cables from the card that is currently installed
3
. If no such a tool is included, disconnect the
cables by picking up the connectors with your fingers and gently unplugging them. Then remove
the screw
4
and the card pops up.
3
3
4
6. Remove the card.
5
7. Insert the new PCI Express Mini Card into the slot at an angle about 20 degrees until it snaps into
place. Carefully pivot the card downward until it snaps into place. Then, install the screw to secure the
new card.
8. Connect the antenna cables to the new PCI Express Mini Card. Ensure that you connect the gray
cable to the connector on the card marked with “MAIN” or “M”, and connect the black cable to the
connector marked with “AUX” or “A”.
Chapter 6
.
Replacing devices
33