Lenovo H330 Lenovo H3 Series Hardware Replacement Guide - Page 18
Removing the front bezel
View all Lenovo H330 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Removing the front bezel To remove the front bezel: 1. Remove the computer cover. Refer to "Removing the computer cover". Note: For this procedure, it helps to lay the computer on its side. 2. Remove the front bezel by releasing the three plastic tabs inside the chassis and push the bezel outward as shown. 3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes in the chassis, and then snap it into position at the bottom and top of the chassis. 4. Refer to the "Completing the installation". Hardware Replacement Guide 15
15
Hardware Replacement Guide
Removing the front bezel
To remove the front bezel:
1.
Remove the computer cover. Refer to “Removing the computer cover”.
Note:
For this procedure, it helps to lay the computer on its side.
2.
Remove the front bezel by releasing the three plastic tabs inside the chassis
and push the bezel outward as shown.
3.
To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the
corresponding holes in the chassis, and then snap it into position at the bottom
and top of the chassis.
4.
Refer to the “Completing the installation”.