Lenovo IdeaCentre K200 K200 Hardware Replacement Guide - Page 30
To complete the part installation
View all Lenovo IdeaCentre K200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
To complete the part installation: 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer. Refer to "Locating components" for the location of the various components. 2. Make sure that the cables are routed correctly before replacing the computer cover. 3. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails. Then, push the computer cover closed until it snaps into position. 4. If a cover lock is installed, lock the cover. 5. Reconnect the external cables and power cords into the computer. Refer to "Locating connectors on the front of the computer" and "Locating connectors on the rear of the computer". 6. To update your configuration settings, refer to "Starting the Setup Utility" in the User Guide or in the Hardware Maintenance Manual. Note: In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives. 28 Hardware Replacement Guide 31032753 IdeaCentre K_HRG_EN.indd 28 2007.12.7 3:42:08 PM