Lenovo ThinkPad E555 (English) Hardware Maintenance Manual - Page 52

Error messages, Machine Type and Serial Number are invalid.

Get Lenovo ThinkPad E555 PDF manuals and user guides View all Lenovo ThinkPad E555 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

Table 2. Numeric error codes (continued) Symptom or error (beeps, if any) 2100 Detection error on HDD0 (Main HDD) 2101 Detection error on HDD1 (Ultrabay HDD) 2102 Detection error on HDD2 (Mini SATA) 2110 Read error on HDD0 (Main HDD) 2111 Read error on HDD1 (Ultrabay HDD) 2112 Read error on HDD2 (Mini SATA) 2200 Machine Type and Serial Number are invalid. 2201 Machine UUID is invalid FRU or action, in sequence 1. Reseat the hard disk drive. 2. Replace the main hard disk drive. 3. Replace the system board. 1. Reseat the hard disk drive. 2. Replace the Ultrabay® hard disk drive. 3. Replace the system board. 1. Reseat the Mini SATA device. 2. Replace the mini SATA device. 3. Replace the system board. 1. Reseat the hard disk drive. 2. Replace the main hard disk drive. 3. Replace the system board. 1. Reseat the hard disk drive. 2. Replace the Ultrabay hard disk drive. 3. Replace the system board. 1. Reseat the Mini SATA device. 2. Replace the mini SATA device. 3. Replace the system board. Replace the system board. Replace the system board. Error messages Table 3. Error messages Symptom or error (beeps, if any) Fan error. (four short beeps, one long beep) FRU or action, in sequence 1. Replace the fan. 2. Apply thermal grease. 3. Replace the system board. Thermal sensing error. Replace the system board. The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system. Press the ESC key to continue. Replace the battery. This system does not support batteries that are not genuine Lenovo-made or authorized. The system will continue to boot, but may not charge unauthorized batteries. Replace the battery. Attention: Lenovo has no responsibility for the performance or safety of unauthorized batteries, and provides no warranties for failures or damage arising out of their use. 46 Hardware Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Table 2. Numeric error codes (continued)
Symptom or error (beeps, if any)
FRU or action, in sequence
2100
Detection error on HDD0 (Main HDD)
1.
Reseat the hard disk drive.
2. Replace the main hard disk drive.
3. Replace the system board.
2101
Detection error on HDD1 (Ultrabay HDD)
1.
Reseat the hard disk drive.
2. Replace the Ultrabay
®
hard disk drive.
3. Replace the system board.
2102
Detection error on HDD2 (Mini SATA)
1.
ReseattheMiniSATAdevice.
2. Replace the mini SATA device.
3. Replace the system board.
2110
Read error on HDD0 (Main HDD)
1.
Reseat the hard disk drive.
2. Replace the main hard disk drive.
3. Replace the system board.
2111
Read error on HDD1 (Ultrabay HDD)
1.
Reseat the hard disk drive.
2. Replace the Ultrabay hard disk drive.
3. Replace the system board.
2112
Read error on HDD2 (Mini SATA)
1.
ReseattheMiniSATAdevice.
2. Replace the mini SATA device.
3. Replace the system board.
2200
Machine Type and Serial Number are invalid.
Replace the system board.
2201
Machine UUID is invalid
Replace the system board.
Error messages
Table 3. Error messages
Symptom or error (beeps, if any)
FRU or action, in sequence
Fan error.
(four short beeps, one long beep)
1.
Replace the fan
.
2. Apply thermal grease.
3. Replace the system board.
Thermal sensing error.
Replace the system board.
The battery installed is not supported by this system and
willnotcharge.
PleasereplacethebatterywiththecorrectLenovobattery
forthissystem.
Press the ESC key to continue.
Replace the battery.
This system does not support batteries that are not
genuine Lenovo-made or authorized. The system will
continue to boot, but may not charge unauthorized
batteries.
Attention:
Lenovo has no responsibility for the
performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out
of their use.
Replace the battery.
46
Hardware Maintenance Manual