Lenovo ThinkPad E555 (English) Hardware Maintenance Manual - Page 87
dc-in/USB-connector board with cable, on the part marked
View all Lenovo ThinkPad E555 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
• Ensure that the connector is attached firmly. • Do not press the top of the fan cover and the fan hub. • Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as shown in the following illustrations. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film off from the rubbers marked b . For models with a discrete thermal pipes a b For models with an integrated thermal pipes b 1140 dc-in/USB-connector board with cable For access, remove these FRUs in order: • "1020 Battery pack" on page 66 • "1030 Large bottom cover" on page 67 • "1050 Optical drive or optical-drive bay bezel" on page 69 • "1070 Hard disk drive assembly or solid-state drive assembly" on page 70 • "1110 Keyboard" on page 73 • "1120 Keyboard bezel assembly" on page 75 Chapter 9. Removing or replacing a FRU 81