Lenovo ThinkPad Edge E435 Hardware Maintenance Manual - Page 77
as shown in the following illustrations. Either too much or too less
View all Lenovo ThinkPad Edge E435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
• "1100 Thermal fan" on page 70 Removal steps of thermal pipes Loosen the screws 1 in ascending alphabetic order as illustrated. When attaching the thermal pipes, secure the screws in reverse order. Note: Different models might have different numbers of screws. 1g 1e 1f 1d 1b 1c 1a Note: Your model might look slightly different from the illustration above. 2 Note: Your model might look slightly different from the illustration above. When installing: Before you attach the thermal pipes to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked a as shown in the following illustrations. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film off from the rubbers marked b . For models with a discrete thermal pipes Chapter 9. Removing or replacing a FRU 71