Lenovo ThinkPad Edge E435 Hardware Maintenance Manual - Page 84
System board assembly, Removal steps of CPU, When installing
View all Lenovo ThinkPad Edge E435 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Removal steps of CPU Rotate the head of the screw in the direction shown by the arrow 1 to release the lock; then remove the CPU 2 . 2 1 3 When installing: Place the CPU above the CPU socket, and then rotate the head of the screw in the direction shown by the arrow 3 to secure the CPU. 1150 System board assembly Important notices for handling the system board: When handling the system board, bear the following in mind: • The system board has an accelerometer, which can be broken if several thousands of G-forces are applied. Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject the accelerometer to as much as 6,000 G's of shock. • Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite. • If a system board is dropped, be sure to document the drop in any reject report, and replace the system board. • Avoid rough handling of any kind. • At every point in the process, be sure not to drop or stack the system board. • If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated conductive surface. For access, remove these FRUs in order: • "1010 Battery pack" on page 58 78 Hardware Maintenance Manual