Lenovo ThinkPad S431 Hardware Maintenance Manual - Page 79
Hall sensor, 1120 M.2 solid state drive, When installing, Attention
View all Lenovo ThinkPad S431 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
5. Remove the media card reader board. 9 When installing: Ensure that the connectors are attached firmly to the system board and the fingerprint reader. 1110 Hall sensor For access, remove these FRUs in order: • "1020 Base cover assembly" on page 61 • "1030 Battery pack" on page 62 • "1100 Media card reader" on page 71 1 2 Step 1 Screw (quantity) M2 × 3 mm, wafer-head, nylon-coated (1) 1120 M.2 solid state drive For access, remove these FRUs in order: • "1020 Base cover assembly" on page 61 • "1030 Battery pack" on page 62 Attention: Color Black Torque 0.196 Nm (2.00 kgf-cm) Chapter 9. Removing or replacing a FRU 73
5. Remove the media card reader board.
9
When installing:
Ensure that the connectors are attached firmly to the system board and the fingerprint
reader.
1110 Hall sensor
For access, remove these FRUs in order:
•
“1020 Base cover assembly” on page 61
•
“1030 Battery pack” on page 62
•
“1100 Media card reader” on page 71
1
2
Step
Screw (quantity)
Color
Torque
1
M2 × 3 mm, wafer-head, nylon-coated (1)
Black
0.196 Nm
(2.00 kgf-cm)
1120 M.2 solid state drive
For access, remove these FRUs in order:
•
“1020 Base cover assembly” on page 61
•
“1030 Battery pack” on page 62
Attention:
Chapter 9
.
Removing or replacing a FRU
73