Lenovo ThinkPad Yoga 12 (English) Hardware Maintenance Manual - ThinkPad Yoga - Page 64
Before servicing the computer, Disabling the built-in battery, 1010 Lenovo OneLink connector cover
![]() |
View all Lenovo ThinkPad Yoga 12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Before servicing the computer Carefully read this topic before servicing the computer. Disabling the built-in battery Before replacing any FRU, ensure that you have disabled the built-in battery by doing the following: 1. Turn off your computer and disconnect the ac power adapter and all cables from the computer. 2. Turn on your computer. Press F1 to enter ThinkPad Setup when the ThinkPad logo is displayed. 3. Select Config ➙ Power. The Power submenu is displayed. 4. Select Disable built-in battery. 5. Click Yes in the Setup Warning window. Then the computer turns off automatically. Wait three to five minutes to let the computer cool. 1010 Lenovo OneLink connector cover Removal steps of the Lenovo OneLink connector cover Remove the connector cover as shown in the following illustration. 1 Note: Ensure that you reattach the connector cover to the Lenovo OneLink connector after finishing the servicing. 1020 Base cover assembly Removal steps of the base cover assembly Remove the screws 1 , then lift the base cover assembly 2 , and then remove the base cover assembly in the direction 3 as shown. 58 Hardware Maintenance Manual
![](/manual_guide/products/lenovo-thinkpad-yoga-12-english-hardware-maintenance-manual-thinkpad-yoga-12-f35cd92/64.png)