Lenovo Yoga 2-1371 (English) Hardware Maintenance Manual - Yoga Tablet 2 1371 - Page 66

Sub board, Main HDMI FPC see Step 2 on in 1080 Main HDMI FPC

Page 66 highlights

Lenovo 1371 Hardware Maintenance Manual 1100 Sub board Important notices for handling PCB: When handling PCB, bear the following in mind: • Be careful not to drop the PCB onto a bench top that has a hard surface, such as surface made of metal, wood, or composite materials. • Avoid rough handling of any kind. • Make sure not to drop or stack the PCB in the whole process. • Make sure to put the PCB only on surface covered with such materials as an ESD mat or conductive corrugated plate. For access, remove the following FRU: • "1010 Rear cover" on page 28 and Detach the following FPCs and wire connections from the sub board: • Battery FPC (see Step 1 on page 32 to Step 3 on page 34 in "1020 Battery pack") • HDMI and audio jack FPC (see Step 1 on page 43 in "1030 HDMI and audio jack FPC") • Right speaker wire connector (see Step 1 on page 46 in "1040 Right speaker") • Subwoofer FPC (see Step 2 on page 49 and Step 3 on page 49 in "1050 Subwoofer speaker with microphone FPC") • Main FPC (see Step 2 on page 54 in "1070 Main FPC") • Main HDMI FPC (see Step 2 on page 57 in "1080 Main HDMI FPC") 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

Lenovo 1371 Hardware Maintenance Manual
62
1100 Sub board
For access, remove the following FRU:
“1010 Rear cover” on page 28
and
Detach the following FPCs and wire connections from the sub board:
Battery FPC (see Step 1 on page 32 to Step 3 on page 34 in “1020 Battery
pack”)
HDMI and audio jack FPC (see Step 1 on page 43 in “1030 HDMI and audio
jack FPC”)
Right speaker wire connector (see Step 1 on page 46 in “1040 Right speaker”)
Subwoofer FPC (see Step 2 on page 49 and Step 3 on page 49 in “1050
Subwoofer speaker with microphone FPC”)
Main FPC (see Step 2 on page 54 in “1070 Main FPC”)
Main HDMI FPC (see Step 2 on page 57 in “1080 Main HDMI FPC”)
Important notices for handling PCB:
When handling PCB, bear the following in mind:
Be careful not to drop the PCB onto a bench top that has a hard surface,
such as surface made of metal, wood, or composite materials.
Avoid rough handling of any kind.
Make sure not to drop or stack the PCB in the whole process.
Make sure to put the PCB only on surface covered with such materials as
an ESD mat or conductive corrugated plate.