Lexmark 20D0000 User's Guide - Page 58
Customizing scan settings, Scanning over a network
![]() |
UPC - 734646026956
View all Lexmark 20D0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Customizing scan settings 1 Open QLINK: • Double-click the QLINK icon on the desktop. • Click Start Æ All Programs Æ Lexmark Æ Lexmark X34x Series Æ QLINK. 2 Select the destination you want to scan to. 3 Click Edit. 4 Adjust the scan settings. 5 Click OK. Scanning over a network Note: Only available on the X342n connected to a network 1 Type the IP address of the MFP in the address line of your browser, and then press Enter. If the Java applet screen appears, click Yes. Note: The IP address can be found on the network setup page. For more information, see Printing a network setup page (X342n only) 2 Click Scan Profile. 3 Click Create Scan Profile. 4 Select your scan settings, and then click Next. 5 Select a location for saving the scanned output file somewhere on your computer. 6 Enter a profile name. The profile name is the name that will appear on the Scan Profile list on the MFP control panel when the scan button is pressed. 7 Click Submit. 8 Review the instructions on the Scan to PC screen. A shortcut number was automatically assigned when you clicked Submit. You can use this shortcut number when you are ready to scan your documents. a Go to the MFP, and place your original document in the ADF face up, long edge first. b Press # followed by the shortcut number on the keypad, or touch Profiles on the home screen. Scanning over a network 58
![](/manual_guide/products/lexmark-342n-users-guide-c219438/58.png)