Lexmark 5770 Photo Jetprinter User Guide - Page 67
Left and Right Margins, Change Print Quality to Quick Print 600.
View all Lexmark 5770 Photo Jetprinter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Problems Poor print quality at left, right, or bottom edge of envelope Print is too dark or smudged Photo is too dark or smudged Solutions Like other printers, your printer cannot print in the extreme left, right, or bottom edges of an envelope. To avoid poor print quality at the edges of the envelope, we recommend using these minimum margin settings: Left and Right Margins Left and right margin settings must be at least 6.35 mm (0.25 in.) each for all envelope sizes. Top and Bottom Margins The top margin must be set to at least 1.7 mm (0.067 in.) The bottom margin setting for all envelope sizes must be 12.7 mm (0.5 in.). Try the following suggestions to correct this problem: • Increase the Brightness setting. • Make sure the Paper Type setting in the printer software matches the Paper type loaded in the printer. • Make sure the paper is straight and unwrinkled. • Let the ink dry before handling the paper. • Change Print Quality to Quick Print 600. • Clean the print cartridge nozzles. See "Cleaning the print nozzles" on page 29. Try the following suggestions to correct this problem: • Make sure the Photo cartridge is installed. • Adjust the printer software settings. • We recommend using a coated paper or photo paper for the best print results. Troubleshooting Troubleshooting 61