Lexmark 9350 User's Guide - Page 80

Load up to Make sure 25 sheets of labels • You use full label sheets. Partial sheets (with areas exposed by missing labels) may cause labels to peel off during printing, resulting in a paper jam. • You load letter- or A4-size label sheets. • The print side of the labels faces down. • The top of the labels feeds into the printer first. • The paper guides rest against the left, right, and bottom edges of the label sheets. Note: Labels require more drying time. Remove each sheet of labels as it exits, and allow it to dry to avoid ink smudging. 50 transparencies • The rough side of the transparencies faces down. • You load letter- or A4-size transparencies. • You remove any paper backing sheets from the transparencies before loading. • If the transparencies have a removable strip, each strip faces down toward Tray 1. • The paper guides rest against the left, right, and bottom edges of the transparencies. Note: Transparencies require more drying time. Remove each transparency as it exits, and allow it to dry to avoid ink smudging. 10 iron-on transfers • You follow the loading instructions that came with the iron-on transfers. • The print side of the transfers faces you. • The paper guides rest against the edges of the transfers. Note: For best results, load transfers one at a time. 25 index cards, photo cards, or postcards • The thickness does not exceed 0.025 inches (0.635 mm). • The print side of the cards faces down. • You load the cards in the center of the tray, as indicated by the 4 x 6 photo card outline. Load the cards as shown. • The paper guides rest against the left, right, and bottom edges of the cards. Note: Photo cards require more drying time. Remove each photo card as it exits, and allow it to dry to avoid ink smudging. 80