Lexmark B3442 Users Guide PDF - Page 47
Image, PCL5 Minimum Line Width, A4 Width, Auto CR after LF, Tray Renumber, Print Timeout, Auto Fit
View all Lexmark B3442 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Use printer menus 47 Menu item Description PCL5 Minimum Line Width 1-30 (2*) PCLXL Minimum Line Width 1-30 (2*) Set the initial minimum stroke width. Note: Jobs printed in 1200 dpi use the value directly. A4 Width 198 mm* 203 mm Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is printed. Auto CR after LF Off* On Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR Off* On Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign MP Feeder Assign Tray [x] Assign Manual Paper Assign Manual Envelope Configure the printer to work with a different print driver or custom application that uses a different set of source assignments to request a given paper source. Choose from the following options: Off*-The printer uses the factory default paper source assignments. None-The paper source ignores the Select Paper Feed command. 0-199-Select a numeric value to assign a custom value to a paper source. Tray Renumber View Factory Defaults Show the factory default value assigned for each paper source. Tray Renumber Restore Defaults Restore the tray renumber values to their factory defaults. Print Timeout 1-255 (90 seconds*) Disabled Set the printer to end a print job after it has been idle for the specified amount of time in seconds. Note: An asterisk (*) next to a value indicates the factory default setting. Image Menu item Description Auto Fit On Off* Select the best available paper size and orientation setting for an image. Note: When set to On, this menu item overrides the scaling and orientation settings for the image. Invert Off* On Invert bitonal monochrome images. Note: This menu item does not apply to GIF or JPEG image formats. Note: An asterisk (*) next to a value indicates the factory default setting.