Lexmark C750 Setup Guide - Page 36
Replacing the system board access cover, cover lip as far as it will go,
![]() |
View all Lexmark C750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Replacing the system board access cover After you have finished installing cards on the printer system board, you must replace the system board access cover. 1 Align the slots at the top of the access cover with the screws near the top of the printer. 2 Slide the cover up under the top cover lip as far as it will go, and then tighten the screws at the top of the cover. 3 Insert and tighten the four screws to the bottom of the cover. 30 Install memory and option cards
![](/manual_guide/products/lexmark-13p0000-setup-guide-c98f30b/36.png)
30
Install memory and option cards
Replacing the system
board access cover
After you have finished installing cards
on the printer system board, you must
replace the system board access cover.
1
Align the slots at the top of the
access cover with the screws near
the top of the printer.
2
Slide the cover up under the top
cover lip as far as it will go, and
then tighten the screws at the top
of the cover.
3
Insert and tighten the four screws
to the bottom of the cover.