Lexmark CS730 Users Guide - Page 82
Supply Usage And Counters, Printer Emulations, Print Configuration
View all Lexmark CS730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Use printer menus 82 Menu item Description Supply Usage And Counters Reset Maintenance Counter Reset the counter after installing a new fuser. Supply Usage And Counters Tiered Coverage Ranges Adjust the amount of color coverage for each printing range. Printer Emulations PPDS Emulation Off* On Set the printer to recognize and use the PPDS data stream. Printer Emulations PS Emulation Off On* Set the printer to recognize and use the PS data stream. Printer Emulations Enable Formsmerge Off* On Activate Formsmerge to store the forms into the hard disk or Intelligent Storage Drive (ISD). Note: A hard disk or an ISD must be installed. Printer Emulations Enable Prescribe Off* On Enable Prescribe emulation. Printer Emulations Emulator Security Page Timeout (60 minutes*) Reset Emulator After Job (Off*) Disable Printer Message Access (On*) Configure the security settings of the printer during emulation mode. Print Configuration Black Only Mode Off* On Set the printer to print always color content in grayscale . Print Configuration Color Trapping Off 1 2* 3 4 5 Enhance the printed output to compensate for misregistration in the printer. Print Configuration Font Sharpening 0-150 (24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Note: An asterisk (*) next to a value indicates the factory default setting.