Lexmark CX310 Quick Reference - Page 1

Quick Reference Learning about the printer Using the printer control panel 1 23 45 10 98 76 Use the To 1 Display • View printing, copying, e‑mailing, and scanning options. • View printer status and error messages. 2 Select button • Select menu options. • Save settings. 3 Arrow buttons Scroll through menus or settings on the display. 4 Keypad Enter numbers, letters, or symbols. 5 Sleep button Enable Sleep mode or Hibernate mode. 6 Cancel button Stop all printer activity. 7 Start button Start a job, depending on which mode is selected. 8 Back button Return to the previous screen. 9 Home button Go to the home screen. 10 Indicator light Check the status of the printer. Understanding the colors of the indicator and Sleep button lights The colors of the indicator and Sleep button lights on the printer control panel signify a certain printer status or condition. Indicator light color and its corresponding printer status Indicator light Off Blinking green Solid green Blinking red Printer status The printer is off or in Hibernate mode. The printer is warming up, processing data, or printing. The printer is on, but idle. The printer requires user intervention. Sleep button light color and its corresponding printer status Sleep button light Printer status Off The printer is off, idle or in Ready state. Solid amber The printer is in Sleep mode. Blinking amber The printer is entering or waking from Hibernate mode. Blinking amber for 0.1 second, then goes completely off for 1.9 seconds in a slow, pulsing pattern The printer is in Hibernate mode. Loading paper and specialty media Setting the paper size and type 1 From the printer control panel, navigate to: > Settings > Size/Type > > Paper Menu > > Paper 2 Press the up or down arrow button to select the tray or feeder, and then press . 3 Press the up or down arrow button to select the paper size, and then press . 4 Press the up or down arrow button to select the paper type, and then press to change the settings. Configuring Universal paper settings The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer menus. Notes: • The smallest supported Universal size is 76 x 127 mm (3 x 5 inches) and is loaded only in the multipurpose feeder and manual feeder. • The largest supported Universal size is 215.9 x 359.9 mm (8.5 x 14.17 inches) and is loaded only in the multipurpose feeder and manual feeder. 1 From the printer control panel, navigate to: > Settings > > Paper Menu > > Universal Setup > 2 Press the up or down arrow buttons to scroll to Units of Measure, Portrait Height, or Portrait Width, and then press . 3 Enter the preferred settings using the keypad, and then press . 4 Press . 1