Lexmark CX310 Quick Reference - Page 11
Caution-hot Surface
View all Lexmark CX310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
b Pull the green lever to open the fuser cover. 3 Open the front door. CAUTION-HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot component, allow the surface to cool before touching. 4 Slide and hold the release latch on the right side of the printer, and then slowly close the top door. 1 2 a If there is a jammed paper under the fuser, then firmly grasp the paper on each side, and then gently pull it out. Note: Make sure all paper fragments are removed. c If there is a jammed paper in the fuser, then hold down the fuser cover, and then remove the paper. Note: Make sure all paper fragments are removed. 11
3
Open the front door.
CAUTION—HOT SURFACE:
The inside of the printer might
be hot. To reduce the risk of injury from a hot component,
allow the surface to cool before touching.
a
If there is a jammed paper under the fuser, then firmly grasp
the paper on each side, and then gently pull it out.
Note:
Make sure all paper fragments are removed.
b
Pull the green lever to open the fuser cover.
c
If there is a jammed paper in the fuser, then hold down the
fuser cover, and then remove the paper.
Note:
Make sure all paper fragments are removed.
4
Slide and hold the release latch on the right side of the printer, and
then slowly close the top door.
1
2
11