Lexmark Dot Matrix Lexmark 4227 Plus User's Guide - Page 11
Align and insert the left and right side tabs of the ribbon cartridge into - printheads
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
5 Manually move the ribbon guide to the side of the cartridge, as shown, then rotate the ribbon advance knob to take up any slack in the ribbon. Ribbon Guide 6 Insert the ribbon guide over the metal pins on each side of the printhead. Pins Getting Started 7 Manually move the printhead to the center position. 8 Align and insert the left and right side tabs of the ribbon cartridge into the slots in the side frames. Chapter 1: Getting Started 5
5
Chapter 1: Getting Started
Getting Started
5
Manually move the ribbon guide to the side of the cartridge, as shown,
then rotate the ribbon advance knob to take up any slack in the ribbon.
6
Insert the ribbon guide over the metal pins on each side of the
printhead.
7
Manually move the printhead to the center position.
8
Align and insert the left and right side tabs of the ribbon cartridge into
the slots in the side frames.
Ribbon Guide
Pins