Lexmark Dot Matrix Lexmark 4227 Plus User's Guide - Page 62
Setting Auto Cut Sheet Load
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Selecting and Loading Paper b Move the right paper guide so that it aligns with the right edge of the envelope. Address added to show correct orientation c Push the envelope in until the Check light stops blinking. The Paper Empty/Add Paper message disappears. • If Auto Cut Sheet Load is On (factory default), the paper feeds automatically to the TOF. To turn Auto Cut Sheet Load On, see "Setting Auto Cut Sheet Load" on page 56. For more information about setting TOF, see "Setting TOF for Single Sheets and Envelopes" on page 70. • If Auto Cut Sheet Load is Off, press FormFeed. 9 Make sure the printer is online (Ready light is on solid). If it is not, press Start/Stop until the Ready light is on solid. You are now ready to print. Setting Auto Cut Sheet Load When set to On, the printer automatically loads a cut form. When set to Off, you must press FormFeed or LineFeed to load a cut form. 56 Chapter 4: Selecting and Loading Paper