Lexmark Dot Matrix Technical Reference - Page 155
Examples, Valid, software, there must be 13 data characters
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Examples: Valid EAN-13 command: 2359458890256 ... Since the b0 bit of the c parameter has a value of 0 (check digit by host/ software), there must be 13 data characters (x0D) specified in the Data Transfer Command. Section 8: Barcodes 155
155
Section 8: Barcodes
Examples:
Valid
EAN-13 command:
Since the b0 bit of the
c
parameter has a value of 0 (check digit by host/
software), there must be 13 data characters (
x0D
) specified in the Data Transfer
Command
.
<x
B5B66
- barcode setup command prefix
0600
-
setup data length (low byte first) -
x0006, 6
B2
- barcode type = EAN-13
00
- module width = default
00
- space width adjustment = default
4003
- height (low byte first) - x0340 =
832 = 0.385 inches
00
- control byte: check digit from
host, print human readable
character, center flag character
1B5B70
- barcode data transfer command
prefix
0D00
- data transfer length (low byte
first) - x000D, 13
>2359458890256 ...