Lexmark Dot Matrix Technical Reference - Page 164
the 0 character added to the barcode above., Since the b0 bit of
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
data character set: Character Hex '0' x30 '1' x31 '2' x32 '3' x33 '4' x34 '5' x35 '6' x36 '7' x37 '8' x38 '9' x39 Examples: Valid Interleaved 2of5 command: 2359 ... - barcode data transfer command prefix - data transfer length (low byte first) x0004, 4 Since the b0 bit of the c parameter has a value of 01 (check digit by printer), note the 0 character added to the barcode above. 164 Section 8: Barcodes
Section 8: Barcodes
164
data
character set:
Examples:
Valid
Interleaved 2of5 command:
Since the b0 bit of the
c
parameter has a value of 01 (check digit by printer), note
the 0 character added to the barcode above.
Character
Hex
’0’
x30
’1’
x31
’2’
x32
’3’
x33
’4’
x34
’5’
x35
’6’
x36
’7’
x37
’8’
x38
’9’
x39
<x
1B5B66
- barcode setup command prefix
0600
- setup data length (low byte first) -
x0006, 6
B6
- barcode type = Interleaved 2of5
00
- module width = default
00
- space width adjustment = default
1003
-
height (low byte first) - x0310 = 784 =
0.363 inches
01
- control byte: check digit from host,
print human readable character
1B5B70
- barcode data transfer command prefix
0400
-
data transfer length (low byte first) -
x0004, 4
>2359 ...