Lexmark Dot Matrix Technical Reference - Page 88

Vertical Movement Name ESC G ESC F Dec Hex Description 27 71 Hn Ln 1B 47 Hn Ln Set Page Length in Inches Sets the page length in increments of 1/2" x the values of Hn Ln. The values for Hn and Ln should be between 00 and 99. For lengths less than 4.5", Hn = 0. 27 70 Hn Ln 1B 46 Hn Ln Set Page Length in Lines Sets the page length in increments of line pitch x the values of Hn Ln. The values for Hn and Ln should be between 00 and 99. For values less than 10, Hn = 0. ESC % S 1 27 37 83 49 1B 25 53 31 Select Skip Over Perforation Skips an inch from the bottom of one page to the top of the next. ESC % S 0 27 37 83 48 1B 25 53 30 Cancel Skip Over Perforation FF 12 0C Form Feed (with carriage return) Advances the paper to the top of the next page. LF 10 0A Line Feed (with carriage return) Advances the form one line. ESC DC2 27 18 1B 12 Graphics Line Feed (without carriage return) Advances the form one line without returning to the left margin. Allows you to overstrike a line of printing and to create special effects like double underlines. ESC ? n : 27 63 n 58 1B 3F n 3A Carriage Return/Feed Selection Value of n 33 34 35 48 49 Operation Carriage return only Forward line feed, no carriage return Forward line feed w/carriage return Reverse line feed, no carriage return Reverse line feed w/carriage return ESC % 5 n 27 37 53 n 1B 25 35 n Perform n/144" Line Feed 0 < n < 127 ESC VT ESC LF 27 11 Hn Ln 1B 0B Hn Ln Skip Down Select Number of Lines 27 10 1B 0A Reverse Line Feed ESC 6 27 54 1B 36 Set Line Spacing to 1/6" ESC 8 27 56 1B 38 Set Line Spacing to 1/8" ESC % 9 27 37 57 n 1B 25 39 n Set Line Spacing to n/144" 88 Section 5: OKI Microline Emulation Mode Printer Commands