Lexmark Dot Matrix Technical Reference - Page 158
Invalid, EAN-8 command
View all Lexmark Dot Matrix manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Since the b0 bit of the c parameter has a value of 01 (check digit by printer), there must be 7 data characters (x07) specified in the Data Transfer Command. Invalid EAN-8 command: >x 1B5B66 - barcode setup command prefix 0600 - setup data length (low byte first) x0006, 6 B3 - barcode type = EAN-8 00 - module width = default 00 - space width adjustment = default 4003 - height (low byte first) - x0340 = 832 = 0.385 inches 01 - control byte: check digit from host, print human readable character 1B5B70 - barcode data transfer command prefix 0700 - data transfer length (low byte first) x0007, 7 >058C454 ... The letter 'C' is not a valid data character for EAN-8; the numbers '0'-'9' are the only valid characters. 158 Section 8: Barcodes
Section 8: Barcodes
158
Since the b0 bit of the
c
parameter has a value of 01 (check digit by printer),
there must be 7
data characters (
x07
) specified in the Data Transfer Command.
Invalid
EAN-8 command:
The letter
’C
’ is not a valid data character for EAN-8; the numbers ’0’-’9’ are the
only valid characters.
>x
1B5B66
- barcode setup command prefix
0600
- setup data length (low byte first) -
x0006, 6
B3
- barcode type = EAN-8
00
- module width = default
00
- space width adjustment = default
4003
- height (low byte first) - x0340 = 832 =
0.385 inches
01
-
control byte: check digit from host, print
human readable character
1B5B70
- barcode data transfer command prefix
0700
- data transfer length (low byte first) -
x0007, 7
>058C454 ...