Lexmark E310 Service Manual - Page 24
Service Error Codes - fuser
UPC - 734646183000
View all Lexmark E310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4044-XXX Service Error Codes Primary Service Error Codes When a service error occurs the printer stops printing and all operator panel LEDs blink in a continuous pattern, indicating a service error, until the printer is powered off. Press and release the operator panel button to display the service error code. Locate the blinking LEDs in the following table and take the indicated action. Blinking Operator Panel LED Software Service Error Code Action Run the Printer Diagnostic Test to diagnose between the ROM SIMM and the controller board. If no other error code displays after the test completes, replace the controller board. Fuser Failure Error Press and release the operator panel button to view the secondary service error code. Go to "Secondary Service Error Codes" on page 2-5. Laser Diode Failure Inspect the printhead cable and replace as necessary. Replace the printhead assembly. If this does not correct the problem, replace the engine/LVPS board. 2-2 Service Manual