Lexmark E460DN User's Guide - Page 122
Restoring Factory Defaults, Routine maintenance needed, Standard Bin Full, Stopping - maintenance kit
UPC - 734646084154
View all Lexmark E460DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Restoring Factory Defaults Wait for the message to clear. When factory default settings are restored: • All downloaded resources in the printer memory are deleted. This includes fonts, macros, and symbol sets. • All settings return to the factory defaults except the Display Language setting in the Setup menu and the custom settings in the Serial , Network, Infrared, LocalTalk, and USB menus. Routine maintenance needed The printer needs to have scheduled maintenance done. Order a maintenance kit, which contains a fuser and a transfer roller. Then contact Customer Support, and report the message. Standard Bin Full Remove the stack of paper from the standard exit bin to clear the message. Stopping Wait for the message to clear. Submitting selection Wait for the message to clear. Too many failed panel logins The printer is now in a lockout mode because: • You attempted to log in too many times with an incorrect PIN • You attempted to log in using an incorrect password number for access to a printer feature, setting, or menu that you do not have access to. Note: There is a defined limit on the number of login attempts. Once the limit is reached, this message appears and the printer enters a lockout mode. The message remains on the printer control panel, and any further attempts to enter menus is denied until the defined time out expires. The time out duration is set by your system support person. Wait for the message to clear once the time out expires, and then: • Enter the correct PIN to access any held jobs • See your system support person if you need a password number to enter a specific printer feature, setting, or menu that is blocked from your use without the number. Tray disabled The specified tray is disabled from the Disable Hardware menu of the Config menu. To clear the message, enable the specified tray through the same menu. Consult your system support person for help. Tray Missing Insert the specified tray into the printer. Understanding printer messages 122