Lexmark E460DN User's Guide - Page 126

56 Standard USB port disabled Try one or more of the following: • The printer discards any data received through the USB port. Press • Make sure the USB Buffer menu item is not set to Disabled. to clear the message and continue printing. 58 Too many flash options installed Try one or more of the following: • Turn the printer off, and then remove extra flash options: 1 Turn the printer off. 2 Unplug the power cord from the wall outlet. 3 Remove the excess flash memory. 4 Connect the power cord to a properly grounded outlet. 5 Turn the printer back on. • Press to clear the message and continue printing. 80 Routine maintenance needed The printer needs to have scheduled maintenance done. Order a maintenance kit, which contains a fuser and a transfer roller. Contact Customer Support, and report the message. 84 PC Kit life warning The photoconductor kit is near exhaustion. Try one or more of the following: • Replace the photoconductor kit. • Press to clear the message and continue printing. 84 Replace PC Kit The photoconductor kit is exhausted. Install a new photoconductor kit. 88.yy Cartridge is low Try one of the following: • Remove the toner cartridge, shake it, and then reinstall it. Press to clear the message and continue printing. • Remove the toner cartridge, and then install a new one. Press to clear the message and continue printing. 88.yy Cartridge nearly low Try one of the following: • Remove the toner cartridge, shake it, and then reinstall it. Press to clear the message and continue printing. • Remove the toner cartridge, and then install a new one. Press to clear the message and continue printing. Understanding printer messages 126