Lexmark M5255 Users Guide PDF - Page 182
Repeating defects, Step 2
View all Lexmark M5255 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Troubleshooting 182 Action Yes Step 2 Contact customer a Check if the printer is using a genuine and supported Lexmark support. toner cartridge. Note: If the toner cartridge is not supported, then install a supported one. b Print the document. No The problem is solved. Do vertical dark streaks with missing images appear on prints? Repeating defects Note: Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to Settings > Troubleshooting > Print Quality Test Pages. For non‑touch‑screen printer models, press to navigate through the settings. Action Yes Step 1 Go to step 2. Using the Print Quality Test Pages, check if the distance between the repeating defects is equal to any of the following: • 96 mm (3.78 in.) • 49 mm (1.93 in.) • 47.5 mm (1.87 in.) • 30.2 mm (1.18 in.) No Take note of the distance, and then contact customer support. Does the distance between the repeating defects match any of the measurements? Step 2 a Replace the imaging unit. b Print the document. Contact customer support. The problem is solved. Do the repeating defects appear?