Lexmark M5255 Users Guide PDF - Page 61

Understanding the printer menus 61 Menu item Description Printer Emulations PPDS Emulation Off* On Set the printer to recognize and use the PPDS data stream. Print Configuration Font Sharpening 0-150 (24*) Set a text point-size value below which the high‑frequency screens are used when printing font data. For example, if the value is 24, then all fonts sized 24 points or less use the high‑frequency screens. Print Configuration Print Density Disabled 1-5 (3*) Adjust the toner density when printing or copying documents. Print Configuration A4 Fuser Compress* Clip Select the fuser to use. Device Operations Quiet Mode Off* On Set the printer to operate in Quiet Mode. Note: Enabling this setting slows down the printer performance. Device Operations Panel Menus Off On* Enable access to the control panel menus. Device Operations Minimum Copy Memory 80MB* 100MB Set the memory allocation for storing copy jobs. Notes: • The values appear only if the amount of installed DRAM is at least twice the amount of the value. • This menu item appears only in some printer models. Device Operations Safe Mode Off* On Set the printer to operate in a special mode, in which it attempts to continue offering as much functionality as possible, despite known issues. For example, when set to On, and the duplex motor is nonfunctional, the printer performs one‑sided printing of the documents even if the job is two‑sided printing. Device Operations Clear Custom Status Erase user‑defined strings for the Default or Alternate custom messages. Device Operations Clear all remotely‑installed messages Erase messages that were remotely installed. Note: An asterisk (*) next to a value indicates the factory default setting.