Lexmark MB2338 Users Guide PDF - Page 58
PCL5 Minimum Line Width, Notes, PCLXL Minimum Line Width, A4 Width, Auto CR after LF, Auto LF after
View all Lexmark MB2338 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Understanding the printer menus 58 Menu item Description PCL5 Minimum Line Width 1-30 (2*) PCLXL Minimum Line Width 1-30 (2*) Set the initial minimum stroke width. Notes: • Jobs printed in 1200 dpi use the value directly. • Jobs printed in 4800CQ use half the value. A4 Width 198 mm* 203 mm Set the width of the logical page on A4‑size paper. Note: Logical page is the space on the physical page where data is printed. Auto CR after LF On Off* Set the printer to perform a carriage return after a line feed control command. Note: Carriage return is a mechanism that commands the printer to move the position of the cursor to the first position on the same line. Auto LF after CR On Off* Set the printer to perform a line feed after a carriage return control command. Tray Renumber Assign MP Feeder Off* None 0-201 Assign Tray [x] Off* None 0-201 Assign Manual Paper Off* None 0-201 Assign Manual Envelope Off* None 0-201 Configure the printer to work with print drivers or applications that use different source assignments for the paper source. Tray Renumber View Factory Defaults Show the factory default setting assigned for each paper source. Tray Renumber Restore Defaults Return all tray assignments to factory default values. Print Timeout Disabled 1-255 (90*) Set the printer to end a print job after it has been idle for the specified amount of time in seconds. Note: An asterisk (*) next to a value indicates the factory default setting.