Lexmark MS510 User's Guide - Page 130
TCP/IP menu, Network/Ports, Standard Network, TCP/IP, Network [x], Network [x] Setup
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Understanding the printer menus 130 TCP/IP menu To access the menu, navigate to any of the following: • Network/Ports > Standard Network > Standard Network Setup > TCP/IP • Network/Ports > Network [x] > Network [x] Setup > TCP/IP Note: This menu is available only in network printers or printers connected to print servers. Use To Set Hostname Set the host name. Notes: • This setting can be changed only from the Embedded Web Server. • The host name is limited to 15 characters, and accepts US‑ASCII, alphanumeric characters and hyphen only. IP Address View or change the current TCP/IP address. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Netmask View or change the current TCP/IP netmask. Gateway View or change the current TCP/IP gateway. Enable DHCP On Off Specify the DHCP address and parameter assignment. Note: On is the factory default setting. Enable RARP On Off Enable BOOTP On Off Enable AutoIP Yes No Enable FTP/TFTP Yes No Enable HTTP Server Yes No WINS Server Address Specify the RARP address assignment setting. Notes: • On is the factory default setting. • This menu item appears only in touch‑screen printer models. Specify the BOOTP address assignment setting. Notes: • On is the factory default setting. • This menu item appears only in touch‑screen printer models. Specify the Zero Configuration Networking setting. Note: Yes is the factory default setting. Enable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol. Note: Yes is the factory default setting. Enable the built-in Web server (Embedded Web Server). When enabled, the printer can be monitored and managed remotely using a Web browser. Note: Yes is the factory default setting. View or change the current WINS server address.