Lexmark MS510 User's Guide - Page 149
Print Recovery, Notes, Hibernate Timeout on Connection, Press Sleep Button, Press and Hold Sleep
View all Lexmark MS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Understanding the printer menus 149 Use To Print Recovery Auto Continue Disabled 5-255 sec Let the printer automatically continue printing from certain offline situations when these are not resolved within the specified time period. Note: Disabled is the factory default setting. Print Recovery Jam Recovery On Off Auto Specify whether the printer reprints jammed pages. Notes: • Auto is the factory default setting. The printer reprints jammed pages unless the memory required to hold the pages is needed for other printer tasks. • On sets the printer to always reprint jammed pages. • Off sets the printer to never reprint jammed pages. Print Recovery Jam Assist On Off Notes: • On is the factory default setting. On sets the printer to automatically dump or partially printed pages to the standard bin after a jammed page has been cleared. • Off requires the user to remove all pages from all possible jam locations. Print Recovery Page Protect Off On Let the printer successfully print a page that may not have printed otherwise. Notes: • Off is the factory default setting. Off prints a partial page when there is not enough memory to print the whole page. • On sets the printer to process the whole page so that the entire page prints. Hibernate Timeout on Connection Hibernate Do Not Hibernate Set the printer to hibernate mode even there is an active Ethernet connection. Note: Do Not Hibernate is the factory default setting. Press Sleep Button Do nothing Sleep Hibernate Determine how the printer, while in idle state, reacts to a short press of the Sleep button. Note: Sleep is the factory default setting. Press and Hold Sleep Button Do nothing Sleep Hibernate Determine how the printer, while in idle state, reacts to a long press of the Sleep button. Note: "Do nothing" is the factory default setting. 1 This menu item appears only in touch‑screen printer models. 2 This menu item appears only in non‑touch‑screen printer models.