Lexmark MS711 User's Guide - Page 197

Troubleshooting 197 Hardware and internal option problems 2100-sheet tray problems Action Yes No Step 1 The problem is solved. Go to step 2. a Pull out the tray, and then do one or more of the following: • Make sure paper lies flat in the tray. • Check for paper jams or misfeeds. • Check if the paper size indicators on the paper guides are aligned with the paper size indicators on the tray. • Check if the paper guides are aligned against the edges of the paper. • Make sure the paper is below the maximum paper fill indicator. • Check if you are printing on a recommended paper size and type. • Check if the paper or specialty media meets specifications and is not damaged. b Insert the tray properly. Note: Press the paper stack down while inserting the tray. Does the tray operate properly? Step 2 The problem is solved. Go to step 3. Turn off the printer, then wait about 10 seconds, and then turn it back on. Does the tray operate properly? Step 3 Print a menu settings page, and then check if the tray is listed in the Installed Features list. Note: If the tray is listed in the menu settings page, but paper jams when it enters or exits the tray, then it may not be properly installed. Go to step 4. For more information, see the setup sheet that came with the 2100-sheet tray. Is the tray listed in the menu settings page? Step 4 Check if the tray is available in the printer driver. Note: You may need to manually add the tray in the printer driver to make it available for print jobs. For more information, see "Updating available options in the printer driver" on page 39. Go to step 5. Manually add the tray in the printer driver. Is the tray available in the printer driver? Step 5 Check if the tray is selected. From the application you are using, select the tray. If you are using Mac OS X version 9, then make sure the printer is set up in Chooser. The problem is solved. Contact customer support. Does the tray operate properly?