Lexmark MS817 Embedded Web Server Administrator s Guide - Page 20

Faxing 20 Faxing Configure the settings through the Embedded Web Server to be able to send and receive fax messages through your printer, using an assigned telephone line or a fax server. Note: Faxing is supported only in a multifunction product. Setting the fax mode 1 From the Embedded Web Server, click Settings > Fax Settings. 2 From the Fax Mode field, select a fax mode. • Analog Fax Setup-Send fax jobs through a telephone line. • Fax Server Setup-Send fax jobs through a fax server. 3 Click Submit. Analog fax setup Configuring the analog fax settings 1 From the Embedded Web Server, click Settings > Fax Settings > Analog Fax Setup. 2 From the Fax Settings section, configure the settings. • Restore Factory Defaults-Restore the factory default fax settings. • Optimize Fax Compatibility-Configure the fax machine for optimal compatibility with other fax machines. • Fax Name-Identify your fax machine. This field contains a maximum of 20 characters. • Fax Number-Identify your fax number. This field contains a maximum of 20 characters. • Fax ID- Specify how the fax is identified. • Enable Manual Fax-Set the printer to fax manually. • Memory Use-Define the allocation of non-volatile memory between sending and receiving fax jobs. • Cancel Faxes-Specify whether to cancel outgoing faxes before they are transmitted, or cancel incoming faxes before they finish printing. • Fax number masking-Specify the format for masking an outgoing fax number. • Digits to mask-Specify the number of digits to mask in an outgoing fax number. • Enable Line Connected Detection-Determine whether a telephone line is connected to the printer. • Enable Line In Wrong Jack Detection-Determine whether a telephone line is connected to the correct port on the printer. • Enable Extension in Use Support-Determine whether a telephone line is used by another device such as another phone on the same line. 3 Click Submit.