Lexmark MX517 User Guide - Page 138
Custom Scan Sizes menu, Universal Setup menu, Notes, Units of Measure, Portrait Width, Portrait Height
View all Lexmark MX517 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Understanding the printer menus 138 Custom Scan Sizes menu Use Custom Scan Size [x] Scan Size Name Width Height Orientation 2 scans per side Off On To Specify a custom scan size name, size, and page orientation. Notes: • 8.5 inches is the U.S. factory default setting for Width. 216 mm is the international factory default setting for Width. • 14 inches is the U.S. factory default setting for Height. 356 mm is the international factory default setting for Height. • Portrait is the factory default setting for Orientation. • Off is the factory default setting for 2 scans per side. Universal Setup menu Use Units of Measure Inches Millimeters Portrait Width 3-8.5 inches 76-216 mm Portrait Height 3-14.17 inches 76-360 mm Feed Direction Short Edge Long Edge To Identify the units of measure. Notes: • Inches is the US factory default setting. • Millimeters is the international factory default setting. Set the portrait width. Notes: • If the width exceeds the maximum, then the printer uses the maximum width allowed. • 8.5 inches is the US factory default setting. You can increase the width in 0.01‑inch increments. • 216 mm is the international factory default setting. You can increase the width in 1‑mm increments. Set the portrait height. Notes: • If the height exceeds the maximum, then the printer uses the maximum height allowed. • 14 inches is the US factory default setting. You can increase the height in 0.01‑inch increments. • 356 mm is the international factory default setting. You can increase the height in 1‑mm increments. Specify the feed direction if the paper can be loaded in either direction. Notes: • Short Edge is the factory default setting. • Long Edge appears only when the longest edge is shorter than the maximum width supported in the tray.