Lexmark MX717 User Guide - Page 168
Serial [x] menu, Mac Binary PS, Notes, ENA Address, ENA Netmask, ENA Gateway, PCL SmartSwitch
View all Lexmark MX717 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Understanding the printer menus 168 Use Mac Binary PS On Off Auto ENA Address yyy.yyy.yyy.yyy ENA Netmask yyy.yyy.yyy.yyy ENA Gateway yyy.yyy.yyy.yyy To Set the printer to process Macintosh binary PostScript print jobs. Notes: • Auto is the factory default setting. • Off filters print jobs using the standard protocol. • On processes raw binary PostScript print jobs. Set the network address information for an external print server. Note: This menu item is available only if the printer is attached to an external print server through the USB port. Set the netmask information for an external print server. Note: This menu item is available only if the printer is attached to an external print server through the USB port. Set the gateway information for an external print server. Note: This menu item is available only if the printer is attached to an external print server through the USB port. Serial [x] menu Note: This menu appears only when an optional serial card is installed. Use PCL SmartSwitch On Off PS SmartSwitch On Off To Set the printer to automatically switch to PCL emulation when a print job received through a serial port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PostScript emulation if PS SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PS SmartSwitch is set to Off. Set the printer to automatically switch to PS emulation when a print job received through a serial port requires it, regardless of the default printer language. Notes: • On is the factory default setting. • When set to Off, the printer does not examine incoming data. The printer uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer language specified in the Setup menu if PCL SmartSwitch is set to Off.