Lexmark MX822 Quick Reference - Page 3

4 Load the paper stack with the printable side facedown, and then make sure that the side guides fit snugly against the paper. • Do not slide paper into the tray. • To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator. Without an optional staple finisher With an optional staple finisher Two‑sided printing Two‑sided printing • When loading prepunched paper, make sure that the holes on the long edge of the paper are against the right side of the tray. One‑sided printing Two‑sided printing Loading the 2100‑sheet tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the tray. 2 Adjust the guides. Loading A5‑size paper a Pull up and slide the width guide to the position for A5. • Load envelopes with the flap side up and against the left side of the tray. • Load letterhead depending on whether an optional staple finisher is installed or not. Without an optional staple finisher With an optional staple finisher One‑sided printing One‑sided printing Warning-Potential Damage: Do not use envelopes with stamps, clasps, snaps, windows, coated linings, or self‑stick adhesives. 5 Insert the tray. 6 From the control panel, set the paper size and paper type to match the paper loaded. 3