Lexmark MX822 Quick Reference - Page 8
Clearing jams
![]() |
View all Lexmark MX822 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
3 Open door E. • ADF glass in door E • Do not slide paper into the tray. Load paper as shown in the illustration. 4 Using a damp, soft, lint-free cloth, wipe the following areas: • ADF glass pad in door E 5 Close door E, and then close the scanner cover. Clearing jams Avoiding jams Load paper properly • Make sure that the paper lies flat in the tray. Correct loading of paper Incorrect loading of paper • Make sure that the paper guides are positioned correctly and are not pressing tightly against the paper or envelopes. • Push the tray firmly into the printer after loading paper. Use recommended paper • Use only recommended paper or specialty media. • Do not load paper that is wrinkled, creased, damp, bent, or curled. • Flex, fan, and align the paper edges before loading. • Do not load or remove a tray while the printer is printing. • Do not load too much paper. Make sure that the stack height is below the maximum paper fill indicator. 8 • Do not use paper that has been cut or trimmed by hand. • Do not mix paper sizes, weights, or types in the same tray. • Make sure that the paper size and type are set correctly on the computer or printer control panel. • Store paper according to manufacturer recommendations.
![](/manual_guide/products/lexmark-mx822-quick-reference-fce7544/8.png)