Lexmark MX822 Quick Reference - Page 5

d Squeeze, and then slide the length guide to the correct position for the size of the paper being loaded. Without an optional staple finisher With an optional staple finisher One‑sided printing One‑sided printing 6 From the control panel, set the paper size and paper type to match the paper loaded. Loading the multipurpose feeder 1 Open the multipurpose feeder. 3 Flex, fan, and align the paper edges before loading. 4 Load the paper stack with the printable side facedown. • Load letterhead depending on whether an optional staple finisher is installed or not. Two‑sided printing Two‑sided printing • When loading prepunched paper, make sure that the holes on the long edge of the paper are against the right side of the tray. One‑sided printing Two‑sided printing 5 Insert the tray. Note: Press down the paper stack while inserting the tray. 2 Adjust the guide to match the size of the paper that you are loading. 5