Lexmark Network Printer Device MarkNet Internal Print Server Quick Start - Page 4
Setup information
View all Lexmark Network Printer Device manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Setup information Step 1: Install the print server Install the Lexmark™MarkNet™ internal print server in an open option card slot inside your printer. If you need help, refer to the Setup Guide that shipped with your printer for instructions about accessing the printer system board, installing option cards, and reinstalling the printer system board. Copies of your printer publications are available on Lexmark's Web site at www.lexmark.com. Step 2: Attach a network cable Attach the printer to your network using an Ethernet or Token-Ring network cable. 1 Make sure the printer is turned off and unplugged. Note: The print server inside the printer automatically adjusts itself for the network speed. 2 Connect the printer to a LAN drop or hub. Use network cabling that is compatible with your network and your print server. See the following illustrations for information about ports and cables. Important: Use only one network port on the MarkNet card even if multiple ports are available. 2