Lexmark OptraImage 242 OptraImage 242/232 Setup Guide (2.5 MB) - Page 14
Method 2: Print server TCP/IP setup utility
View all Lexmark OptraImage 242 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Use either form of UAA (MSB or canonical). You can find information about installing, using, and troubleshooting the utility on the Drivers, MarkVision, and Utilities CD. Method 2: Print server TCP/IP setup utility Use this simple utility to initialize the IP address if your computer is running Windows 95/98, Windows NT, or Windows 2000. You need to know the 12-digit physical address (UAA) of the print server to use this method. The UAA is listed on the network setup page. See "Print a network setup page" on page 13. To install the utility: 1 Launch the Drivers, MarkVision, and Utilities CD that shipped with your OptraImage hardware. 2 Do a custom install to add network support. 3 In the list of installable components, select Print Server TCP/IP Setup Utility. 4 Follow the instructions on your screen. 14 OptraImage Setup Guide