Lexmark OptraImage 242 OptraImage 242/232 Setup Guide (2.5 MB) - Page 4

Safety information General safety information Always follow all safety precautions when installing or using telephone equipment to reduce the risk of fire, electric shock and injury to persons, including the following: • If your product is NOT marked with this symbol , it MUST be connected to a properly grounded electrical outlet. • The power cord must be connected to an electrical outlet near the product and easily accessible. • Refer service or repairs, other than those described in the operating instructions, to a professional service person. • This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for damages resulting from the use of other replacement parts. Fax and telephone safety information • When installing the Lexmark MarkNet N2501e print server containing the fax modem port, follow all safety precautions of any equipment into which the card is being installed. • Do not perform the setup procedures in this guide during a lightning storm. • Never install or use this equipment in wet locations. • Before attempting to access the printer compartment where the option card is installed, you must remove the fax phone line cable first from the wall outlet, and then from the fax modem port of the MarkNet print server. 4 OptraImage Setup Guide