Lexmark T654 Service Manual - Page 117

4062 Error code or message 28x.71 x = bin number 281.72 x = bin number 900.xx 901xx Error contents Deflector gate transition to standard bin not detected Applies to: StapleSmart finisher Sensor (media in stapler) static jam Applies to: StapleSmart finisher System software error System software error Description/Action The sensor (deflector gate HP) does not detect transition of the deflector gate to the standard bin. Media remains on the sensor (media in stapler) during the warm up sequence. Code detected unusual event or timing. Code detected unusual event or timing. Possible repair actions 1. Check all the connections on the output option controller card. 2. Check the sensor (deflector HP) for damage and replace if needed. Go to "SFP stapler assembly sensor (deflector HP) removal" on page 4-190. 3. Replace the output option if problem remains. 1. Inspect the sensor (media in stapler) for proper installation and reinstall if needed. 2. Replace the sensor (media in stapler) Go to "SFP stapler assembly sensor (media in stapler) removal" on page 4-189. 1. POR the machine and print a simple test page to determine if the problem is system software related, or if the customer is sending a corrupted print job. 2. Check all connections on the system card assembly. 3. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. 1. POR the machine and print a simple test page to determine if the problem is firmware related, or if the customer is sending a corrupted print job. 2. Check all connections on the system card assembly. 3. Replace the system card assembly if problem remains. Go to "System card assembly removal (T650, T652, T654, T656)" on page 4-76. Diagnostic information 2-83