Lexmark T654N User Guide - Page 161

Understanding printer messages 161 35 Insufficient memory to support Resource Save feature Try one or more of the following: • Press the arrow buttons until Continue appears, and then press to disable Resource Save and continue printing. • To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the menus to activate the link buffer changes. When Ready appears, enable Resource Save. • Install additional memory. 37 Insufficient memory for Flash Memory Defragment operation Try one or more of the following: • Press the arrow buttons until Continue appears, and then press continue printing. • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. to stop the defragment process and 37 Insufficient memory to collate job Try one or more of the following: • Press the arrow buttons until Continue appears, and then press stored and begin collating the rest of the print job. • Cancel the current print job. to print the portion of the job already 37 Insufficient memory, some held jobs were deleted The printer deleted some held jobs in order to process current jobs. Press the arrow buttons until Continue appears, and then press to clear the message. 37 Insufficient memory, some Held Jobs will not be restored The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk. Press the arrow buttons until Continue appears, and then press to clear the message. 38 Memory full Try one or more of the following: • Press the arrow buttons until Continue appears, and then press • Cancel the current print job. • Install additional printer memory. to clear the message.