Lexmark X464de User's Guide - Page 259
Replace <x> if restarting job., Restore Held Jobs?, Scan Document Too Long, Scanner ADF Cover Open
View all Lexmark X464de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 259 highlights
Replace if restarting job. One or more messages which interrupted a scan job are now cleared. Replace the original documents in the scanner to restart the scan job. is a page of the scan job. Try one or more of the following: • Touch Cancel Job if a scan job is processing when the message appears. This cancels the job and clears the message. • Touch Scan from Automatic Document Feeder if the page jam recovery is active. Scanning resumes from the ADF immediately after the last successfully scanned page. • Touch Scan from flatbed if page jam recovery is active. Scanning resumes from the scanner glass immediately after the last successfully scanned page. • Touch Finish job without further scanning if page jam recovery is active. The job ends at the last successfully scanned page, but the job is not canceled. Successfully scanned pages go to their destination: copy, fax, e-mail, or FTP. • Touch Restart job if job recovery is active. The message clears. A new scan job containing the same parameters as the previous job starts. Restore Held Jobs? Try one or more of the following: • Touch Continue to restore all held jobs stored on the printer hard disk. • Touch Do not restore if you do not want any print jobs to be restored. Scan Document Too Long The scan job exceeds the maximum number of pages. Touch Cancel Job to clear the message. Scanner ADF Cover Open The ADF cover is open. The message clears when the cover is closed. Securely clearing disk space The printer hard disk wiping process needs to recover. The message clears when all blocks are cleared. Serial The printer is using a serial cable connection. The serial port is the active communication link. Set clock The clock is not set. This message appears if no other fax status message appears. It remains until the clock is set. SMTP server not set up. Contact system administrator. An error occurred on the SMTP server, or the SMTP server is not configured properly. Touch Continue to clear the message. If the message appears again, contact your system support person. Troubleshooting 259