Lexmark X543 User's Guide - Page 163
<color> Low, Dialing, DO NOT TOUCH, Fax complete, Fax failed, Flushing buffer, File corrupt, Hex Trace - cartridge
View all Lexmark X543 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
Low Replace the toner cartridge, and then wait for the message to clear. Dialing A fax number is dialed. If the number is too long to fit on the screen, only the word Dialing appears. Wait for the message to clear. DO NOT TOUCH The printer is receiving a code to update a file. Wait for the message to clear. Warning-Potential Damage: Do not turn off or touch the printer while this message appears on the display. Fax complete A fax that was sent or received is complete. Wait for the message to clear. Fax failed The fax failed to be sent. Wait for the message to clear. Flushing buffer Wait for the message to clear. File corrupt A file with a valid extension is detected, but the actual file type does not match the extension, or the file is corrupt. Hex Trace The printer is in Hex Trace mode. With Hex Trace selected, all data sent to the printer is printed in hexadecimal and character representation. This is used to help isolate the source of a print job problem. Note: Control codes are not executed. To exit Hex Trace, turn the printer off, wait about 10 seconds, and then turn the printer on. Imaging Kit Replace the imaging kit, and then press to clear the message and continue printing. Incoming call This message appears when using manual fax mode. Press to print a black only fax or to print a color fax. Insert Tray Insert the specified tray into the printer. Understanding printer messages 163