Lexmark X642E User's Guide - Page 167
Solving 2000-sheet drawer problems, Problem, Solution
UPC - 734646258746
View all Lexmark X642E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Solving 2000-sheet drawer problems Problem Solution The elevator tray does not raise when the loading door is closed, or the elevator tray does not lower when the door is opened and the elevator button is pushed. Check the following: • The MFP is properly attached to the 2000-sheet drawer. • The MFP is powered on. • The power cord is plugged firmly into the back of the 2000- sheet drawer. • The power cord is plugged into an outlet. • The outlet has power. The elevator tray lowers unexpectedly. Check to see if the MFP is out of print media or has a jam. More than one sheet of print media is fed, or a sheet is fed improperly. A jam occurs. Remove the print media in the MFP paper path, and check the stack to ensure the print media has been loaded properly. Be sure to remove the top and bottom sheets of each ream of paper that is loaded. Rubber feed rollers do not turn to advance print media. Check the following: • The power cord is plugged firmly into the back of the 2000sheet drawer. • The power cord is plugged into an outlet. • The outlet has power. Consistent misfeeds or jams in the drawer Try the following: • Flex the paper. • Turn the print media over. Check the following: • Drawer is properly installed. • Print media is loaded correctly. • Print media is not damaged. • Print media meets specifications. • Guides are positioned correctly for the print media size selected. Service messages A service message indicates an MFP failure that may require service. Turn the MFP off, wait about 10 seconds, and then turn the MFP on. If the error recurs, write down the error number, the problem, and a detailed description. Call for service. 167