Lexmark X854E Setup Guide - Page 28
Step4: Install the scanner - driver
UPC - 734646002813
View all Lexmark X854E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Step 4: Install the scanner 1 Open the scanner box and then remove all items from the box except the scanner. 2 Make sure you have the following items: Scanner Feed tray Paper tray extension Paper stop Y-line power cord Power adapter Scanner cable Setup Guide Drivers CD Spare pad assembly 3 Place all items except the scanner aside for later use. 4 Remove the scanner from the box and place it on a flat, level surface. 5 Locate the lock switch on the bottom of the scanner. 6 Push the switch up to the unlocked position. 7 Place the scanner on the scanner shelf. 8 Insert two thumbscrews into the bottom of the scanner and tighten securely. The thumbscrews are attached to the bottom of the scanner shelf. Install the scanner 23
23
Install the scanner
Step 4: Install the scanner
1
Open the scanner box and then remove all items from the box
except the scanner.
2
Make sure you have the following items:
3
Place all items except the scanner aside for later use.
4
Remove the scanner from the box and place it on a flat, level
surface.
5
Locate the lock switch on the bottom of the scanner.
6
Push the switch up to the unlocked position.
7
Place the scanner on the scanner shelf.
8
Insert two thumbscrews into the bottom of the scanner and
tighten securely.
The thumbscrews are attached to the bottom of the scanner
shelf.
Scanner
Power adapter
Feed tray
Scanner cable
Paper tray extension
Setup Guide
Paper stop
Drivers CD
Y-line power cord
Spare pad assembly