Lexmark Xs463de User Guide - Page 199

Fax Receive Settings Menu item Enable Fax Receive On Off Fax Job Waiting None Toner Toner and Supplies Rings to Answer 1-25 Auto Reduction On Off Paper Source Auto Tray Multi-Purpose Feeder Separator Sheets None After job Before job Separator Sheet Source Tray Manual feeder Sides (Duplex) On Off Fax Footer On Off Max Speed 2400 4800 9600 14400 33600 Fax Forwarding Forward Print Print and Forward Description Allows fax jobs to be received by the printer Note: On is the factory default setting. Allows a fax to be held until toner or supplies are replaced Notes: • This menu item appears only if a hard disk is supported and installed. • None is the factory default setting. Specifies the number of rings before answering an incoming fax job Note: 3 is the factory default setting. Scales an incoming fax job so it fits the size of the paper loaded in the designated fax source Note: On is the factory default setting. Specifies the paper source selected to supply paper for the printer to print an incoming fax Note: Auto is the factory default setting. Places a sheet of paper before or after a received fax. Note: None is the factory default setting. Specifies a paper source. Note: Tray is the factory default setting. Enables duplex printing (two-sided printing) for incoming fax jobs Note: Off is the factory default setting. Prints the transmission information at the bottom of each page from a received fax Note: On is the factory default setting. Specifies the maximum speed in baud at which faxes are received Note: 33600 is the factory default setting. Enables forwarding of received faxes to another recipient Understanding printer menus 199